AM 501 Operational Amplifier


Tektronix Operational Amplifier for TM 500 Modul series

  • +/-40V Output
  • +/-50mA Output
  • Symmetrical Differential Design
  • 50V/µs Slew Rate - At least 50V/µs into an 800 Ohm load
  • 10,000 Open Loop Gain - At least 80dB at 60Hz into 800 Ohm load
  • Bandwidth - At least 5MHz into 800 Ohm load
  • Common Mode Rejection Ratio - Typ. >20,000 to 1 at 60Hz for common-mode signals up to +/-40V

  • Input Bias Current - Typ. <500pA at 25°C, <2nA at 50°C
  • Drift - <100µV/°C
  • Noise - <10µV RMS
  • Maximum Differental Input Voltage 80V

  • Voltage Range - At least +/-40V into 2kohm
  • Current Limit - At least +/-50mA
  • Open Loop Output R - approx. 150ohm

Accessory available:
AM 501 Auxiliary Circuit Board Kit (Order 013-0146-00)
This kit attaches to the input and output terminal plugs on the front of the AM 501 Operational Amplifier. This kit is a PC board that has six terminal studs for attachment to the amplifier's banana jacks and is approximately 2.5 inches square. This permits the designer to build a circuit of resistors, capacitors, and other components for use in conjunction with the AM 501's input, output, or feedback circuits. With several boards, the AM 501 Op Amp circuit can be changed instantly in configuration from integrator to differentiator to amplifier.
(see catalog for a photo)

       (data and text from 1983 product catalog)



        Tektronix Gallery        Index

Impressum und Haftungsausschluss